| |
This script steps executes triggers at each gain range in order to force calibration cycles so that after the script is complete, the scope will calibrate less frequently.
|
|
|
This script software-triggers the scope every 5 seconds and then appends the "min", "max" and "mean" results for measurement P1 to a file on the oscilloscope's hard drive.
|
This script saves the trigger times of each segment in a Sequence Mode acquisition to a text file.
|
This script shows how to decode the CVARS such as "FirstEventTime" that can be readout from the scope or that are contained in he WaveML files.
|
MATLAB script that connects to a scope via TCPIP (VICP), reads back C1 & plots the waveform
|
This script positions the measure gates of P1-P6 to the position of the measurement cursors.
|
This script generates an analog waveform out of a digital bus. The scaling of the analog trace is correct as long as a maximum of 12 digital lines are used.
|
This script reads the Harmonics Table created with the PMA2 Option into Excel
|
This script loads screendumps from networked WaveJet Scopes so that you can print the screendumps on a printer connected to the remote PC.
|
|
